Ask a question

Forums » Ask a Question

Use this forum to post your questions to our experts – you need to be logged on to do it (you can register here ), then scroll down to the bottom of this page and click the blue Post Thread words

If you can help answer the question, feel free to post a reply – you need to be logged on to do it (you can register here ), then hit the reply button on the thread.

To go back to the experts page click here>>

AuthorMessage

pdscaz
pdscaz

Posted: Thu Oct 28, 2010 5:29pm

Post Subject: alternator drive

having chewed up a couple of drive belts on leisure battery alternator this season thinking about changing to mlti vee drive for alt. can get pulley for the alternator but can't find where to obtain a crank pulley.the engine is a perkins kfc (2004 manufacture )main agent can't find one will have to find a pulley supplier and workshop to engineer it any thoughts regards ps

Tony-B...

Posted: Fri Oct 29, 2010 12:23pm

Post Subject: alternator drive

I am afraid that I can not help much on this but I trust our readers can. It would help if you told us where the boat is. I think your engine crankshaft pulley may need machining as well so it can accept the multi-V belt. If you are in the north talk to PB Mechanical Services, in the south try Calcutt boats because they fit those pulleys on the BMC 1.8. You could also look in Yellow Pages for your local Bearing & Belt stockists. They may well be able to supply a blank pulley for you to get machined locally. Over to our readers. Tony Brooks

Like us on Facebook

Canal Boat Magazine

Forums » Ask a Question

Use this forum to post your questions to our experts – you need to be logged on to do it (you can register here ), then scroll down to the bottom of this page and click the blue Post Thread words

If you can help answer the question, feel free to post a reply – you need to be logged on to do it (you can register here ), then hit the reply button on the thread.

Like us on Facebook

Follow us on Twitter